laryee Logo

ASTM D3575

LARYEE sells 3 point bending test machines and provides information on bend testing applications & standard bend testing such as ASTM D3575. ASTM D3575 is the international standard for determining flexural properties of cellular material made from olefin polymers. This test method covers the deflection of the foam specimen under a compressive force and under specified conditions of time and temperature, then noting the effect on the thickness of the specimen after releasing the compressive force.This test method covers the measurement of the force necessary to produce a 25 % compression over the entire toparea of the foam specimen.

Equipment Required:

An apparatus shall be provided having a flat compression foot, larger than the specimen to be tested, connected to a force-measuring device and mounted in a manner such that the product or specimen can be deflected (compressed) at a speed of 0.2 to 4 mm/s (0.5 to 2 in./min).The apparatus shall be arranged to support the specimen on a level horizontal plate. Compression Device, consisting of two or more flat plates arranged so the plates are held parallel to each other by bolts or clamps, and the space between the plates is adjustable to the required deflection thickness by means of spacers .we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to ASTM D3575

Copyright LARYEE CORPORATION, All rights reserved. Tel:86-10-67086287 | Fax:86-10-67085997|