laryee Logo

ASTM D1876-2001

ASTM D1876-2001 is primarily intended for determining the relative peel resistance of adhesive bonds between flexible adherends by means of a T-type specimen.

Type specimens:

Laminated test panels consist of two flexible adherends properly prepared and bonded together in accordance with the adhesive manufacturer’s recommendations.
Specially prepared test panels 152 mm wide by 305 mm long, but bonded only over approximately 241 mm of their length. Test panels of these same dimensions may
also be cut from larger, fully laminated panels.

Testing procedure:

Clamp the bent, unbonded ends of the test specimen in
the test grips of the tension testing machine. Apply the load at a constant head speed of 254 mm/min.

Equipment required:

If you need this machine,feel free to contact us. We will provide suitable model.

Copyright LARYEE CORPORATION, All rights reserved. Tel:86-10-67086287 | Fax:86-10-67085997|